Installation Process of Windows XP Professional1. Standard Installation (Clean Installation )
2. Up-gradation
3. Unattended Installation.
4. RIS (Remote Installation System)
_ Steps for Clean or standard Installation:
1. Start Your Pc
2. Enter in BIOS (by pressing
F1, F2, F3, DEL, ESC…etc according to supplier)
Or we can see the BIOS Entering Key on Startup screen…3. Go to Boot & Set “Boot
Device Priority”
1st
Boot Device – CD-ROM
2nd
Boot Device - HDD (Hard Disk)
3rd
Boot Device – Any
& Save the Setting & Exit4. Insert XP CD into the CD-Rom
& restart computer
5. Press Any Key when “Press any
key to boot from CD” Prompt on Screen
6. Next you’ll get the option to
“Repair or Enter Setup” Press Enter.
7. Press F8 to agree with the
License
8. Setup will scan for the
previous window installation
9. Choose the location to
install
a) If this is a clean Hard
Drive, you can choose to create a partition in the un-partitioned space. At
this point you can allow setup to use all the space or set
a size for partition.b) If the partition are already
made then select a Partition to install it.
10. Choose the file system from
the screen. Press Enter to continue…
11. Setup will show the progress
box & reboot when copying file is complete.
12. After restarting when you
would see ““Press any key to boot from CD” do not Press any key…
13. From this point you will
follow the screen prompt
14. Enter you Name &
Organization
15. Enter Product Key
16. Choose name for you computer
17. Choose you Time, Date &
Time Zone
18. Setup will scan for network
19. If detected you have choice
to choose typical configuration or custom configuration
Choose typical if you are unsure.20. Choose your workgroup
21. Setup will continue &
reboot after finish…ignore ““Press any key to boot from CD”
22. You will see a change display
setting, click yes to accept the setting
23. Your XP is installed &
follow the few prompt instruction
Note: We can remove CD when 18 min are remaining to complete
Installation
